Toroidal Power Transformers for 117V/234V, 50-60Hz Operation

Overview

The S-Series

In Stock, Standard

  • Primary Voltage:                        117V/234V
  • Operating Frequency:                50Hz and 60Hz
  • Power Range:                            26VA – 40,000VA
  • Dual Secondary Voltages           As specified
  • Dimensions and Weight              See below
  • Insulation System:                      Class B (130 C)
  • Mounting Hardware:                   See below

Safety Standard Certifications:

  • UL506, UL5085, CSA C22.2 No.66-1988, EN 61558-1, IEC61558-1, IEC742
  • Intertek File: 3051384
  • UL Files E178316, E140446

 

International 50-60Hz Toroidal Power Transformers for Industrial and Commercial Applications
Dual Primaries: 2 X 117V, 50/60 Hz (Optional  Quad Primaries: 100/117/220/240V )
Power Rating VA P/N   Dimensions* Weight* Mounting Hardware
    Frequency  OD. x HT     in.  mm  lbs.    kg
26 TN026 50 / 60 Hz 2.6 x 1.4  66 x 36 1.1 0.5 Washer/ pad size: 1
50 TN050 50 / 60 Hz 3.2 x 1.5 81 x 38 1.7 0.8 Washer/ pad size: 2
100 TN100 50 / 60 Hz 3.9 x 1.6 99 x 41 2.4 1.1 Washer/ pad size: 3
150 TN150 50 / 60 Hz 4.3 x 1.7 109 x 43 3.4 1.6 Washer/ pad size: 3
200 TN200 50 / 60 Hz 4.5 x 1.9 114 x 48 4.4 2.0 Washer/ pad size:  4
250 TN250 50 / 60 Hz 4.7 x 2.1 119 x 53 5.4 2.5 Washer/ pad size:  4
300 TN300 50 / 60 Hz 5.0 x 2.3 127 x 59 6.2 2.8 Washer/ pad size:  4
400 TN400 50 / 60 Hz 5.2 x 2.5 132 x 64 7.4 3.4 Washer/ pad size:  5
480 TN480 50 / 60 Hz 5.3 x 2.6 135 x 66 8.1 3.7 Washer/ pad size:  5
500 TN500 50 / 60 Hz 5.4 x 2.8 137 x 71 8.8 4.0 Washer/ pad size:  5
600 TN600 50 / 60 Hz 5.7 x 2.9 145 x 74 10.3 4.7 Epoxy potted center w/ 3/8″ hole
750 TN750 50 / 60 Hz 6.3 x 2.8 160 x 74 12.7 5.8 Epoxy potted center w/ 3/8″ hole
1000 TN1000 50 / 60 Hz 6.6 x 3.0 168 x 76 15.4 7.0 Epoxy potted center w/ 3/8″ hole
1300 TN1300 50 / 60 Hz 7.0 x 3.0 178 x 76 19.0 8.6 Epoxy potted center w/ 3/8″ hole
1700 TN1700 50 / 60 Hz 8.0 x 3.0 203 x 76 23.0 10.4 Epoxy potted center w/ 3/8″ hole
2300 TN2300 50 / 60 Hz 8.5 x 3.5 216 x 89 29.0 13.2 Epoxy potted center w/ 3/8″ hole
3000 TN3000 50 / 60 Hz 9.5 x 3.5 241 x 89 33.0 15.0 Epoxy potted center w/ 3/8″ hole
4000 TN4000 50 / 60 Hz 9.8 x 4.0 249 x 102 42.0 19.1 Epoxy potted center w/ 1/2″ hole
5500 TN5500 50 / 60 Hz 11.0 x 4.5 279 x 114 62.0 28.1 Epoxy potted center w/ 1/2″ hole
7500 TN7500 50 / 60 Hz 13.0 x 5.0 330 x 127 76.0 34.5 Epoxy potted center w/ 1/2″ hole
10000 TN10000 50 / 60 Hz 13.5 x 6.0 343 x 152 110.0 49.9 Epoxy potted center w/ 5/8″ hole
15000 TN15000 50 / 60 Hz 15.0 x 6.0 381 x 152 150.0 68.0 Epoxy potted center w/ 5/8″ hole
20000 TN20000 50 / 60 Hz 16.0 x 6.5 406 x 165 195.0 88.5 Epoxy potted center, two 5/8″ holes
40000 TN40000 50 / 60 Hz 18.0 x 7 457 x 178 240.0 110.0 Epoxy potted center, two 5/8” holes

A metal washer and rubber pads provide the most economical way of mounting the transformer horizontally and is adequate for transformers under 600 VA, provided the transformer is not installed in a product that receives rough handling.  Above 600 VA, epoxy potted center is standard mounting method.  Prices include mounting hardware, either a steel washer and two rubber pads or as shown for larger sizes, an epoxy potted center with one or two drilled mounting holes.

Optional Mounting Hardware

For a nominal cost you can order smaller transformers with epoxy potting, either with drilled hole or threaded inserts. The potting has a recessed top to accommodate screw head. Flat bottom is a standard feature.

The L-Bracket
An L-shaped steel bracket is an economical solution for vertical mounting. A metal washer and two rubber pads are furnished with each L-bracket. Larger transformers will have an epoxy potted center.

Standard Sizes of Steel Washers
Dimensions in Inches
Size A B C T D
1 2.00 .75 .188 .04 .18
2 2.38 .88 .188 .05 .22
3 2.75 1.13 .25 .06 .26
4 3.50 1.25 .25 .06 .28
5 4.38 1.38 .31 .08 .33
6 5.70 1.75 .31 .08 .50

 

Reach Us

Contact Us for Information and Sales

6 Waterview Drive, Shelton, CT 06484

(203) 954-0050

(800) 836-5920

Fax: (203) 954-0051

sales@bridgeportmagnetics.com

Contact