Applications

• Transformer cores in switch mode power supplies at 400 – 20,000 Hz
• Transformers for Inverters in Welding Equipment, Wind Turbines, and Solar Panels
• Output Filter Chokes in Large Switching Mode Power Supplies 
• UPS harmonic inductors
• High power ballasts
• Power Factor Correction Chokes in UPS 

Advantages Over Silicon Steel, Ferrite and Powdered Iron Cores

• Approximately 50% lower Core Weight and Volume due to Higher Saturation Induction
• Low Core Losses due to Ultra-Thin Lamination Thickness (1 mil = 25 µM)
• Smaller Overall Design due to Low Temperature Rise
• Fast Assembly into Pre-Wound Coils
• Easily Adjustable Air Gap
• Wide Operating Temperature Range (-55°C to 130°C).

Properties

Saturation induction                           1.56 Tesla
Magnetostriction at saturation            27 ppm
Resistivity, microohm-cm                   130
Lamination thickness:                         0.001”
Density                                                7.28 (g/cm3)
Crystallization temperature                 508°C
Curie temperature                               399°C
Magnetostriction at saturation            27 ppm