Toroidal Power Transformers for 117V/234V, 50-60Hz Operation

Overview

The S-Series

In Stock, Standard

  • Primary Voltage:                        117V/234V
  • Operating Frequency:                50Hz and 60Hz
  • Power Range:                            26VA – 40,000VA
  • Dual Secondary Voltages           As specified
  • Dimensions and Weight              See below
  • Insulation System:                      Class B (130 C)
  • Mounting Hardware:                   See below

Safety Standard Certifications:

  • UL506, UL5085, CSA C22.2 No.66-1988, EN 61558-1, IEC61558-1, IEC742
  • Intertek File: 3051384
  • UL Files E178316, E140446

 

Shop Now

 

International 50-60Hz Toroidal Power Transformers for Industrial and Commercial Applications
Dual Primaries: 2 X 117V, 50/60 Hz (Optional  Quad Primaries: 100/117/220/240V )
Power Rating VAP/N Dimensions*Weight*Mounting Hardware
    Frequency OD. x HT     in.  mm lbs.    kg
26TN02650 / 60 Hz2.6 x 1.4 66 x 361.10.5Washer/ pad size: 1
50TN05050 / 60 Hz3.2 x 1.581 x 381.70.8Washer/ pad size: 2
100TN10050 / 60 Hz3.9 x 1.699 x 412.41.1Washer/ pad size: 3
150TN15050 / 60 Hz4.3 x 1.7109 x 433.41.6Washer/ pad size: 3
200TN20050 / 60 Hz4.5 x 1.9114 x 484.42.0Washer/ pad size:  4
250TN25050 / 60 Hz4.7 x 2.1119 x 535.42.5Washer/ pad size:  4
300TN30050 / 60 Hz5.0 x 2.3127 x 596.22.8Washer/ pad size:  4
400TN40050 / 60 Hz5.2 x 2.5132 x 647.43.4Washer/ pad size:  5
480TN48050 / 60 Hz5.3 x 2.6135 x 668.13.7Washer/ pad size:  5
500TN50050 / 60 Hz5.4 x 2.8137 x 718.84.0Washer/ pad size:  5
600TN60050 / 60 Hz5.7 x 2.9145 x 7410.34.7Epoxy potted center w/ 3/8″ hole
750TN75050 / 60 Hz6.3 x 2.8160 x 7412.75.8Epoxy potted center w/ 3/8″ hole
1000TN100050 / 60 Hz6.6 x 3.0168 x 7615.47.0Epoxy potted center w/ 3/8″ hole
1300TN130050 / 60 Hz7.0 x 3.0178 x 7619.08.6Epoxy potted center w/ 3/8″ hole
1700TN170050 / 60 Hz8.0 x 3.0203 x 7623.010.4Epoxy potted center w/ 3/8″ hole
2300TN230050 / 60 Hz8.5 x 3.5216 x 8929.013.2Epoxy potted center w/ 3/8″ hole
3000TN300050 / 60 Hz9.5 x 3.5241 x 8933.015.0Epoxy potted center w/ 3/8″ hole
4000TN400050 / 60 Hz9.8 x 4.0249 x 10242.019.1Epoxy potted center w/ 1/2″ hole
5500TN550050 / 60 Hz11.0 x 4.5279 x 11462.028.1Epoxy potted center w/ 1/2″ hole
7500TN750050 / 60 Hz13.0 x 5.0330 x 12776.034.5Epoxy potted center w/ 1/2″ hole
10000TN1000050 / 60 Hz13.5 x 6.0343 x 152110.049.9Epoxy potted center w/ 5/8″ hole
15000TN1500050 / 60 Hz15.0 x 6.0381 x 152150.068.0Epoxy potted center w/ 5/8″ hole
20000TN2000050 / 60 Hz16.0 x 6.5406 x 165195.088.5Epoxy potted center, two 5/8″ holes
40000TN4000050 / 60 Hz18.0 x 7457 x 178240.0110.0Epoxy potted center, two 5/8” holes

A metal washer and rubber pads provide the most economical way of mounting the transformer horizontally and is adequate for transformers under 600 VA, provided the transformer is not installed in a product that receives rough handling.  Above 600 VA, epoxy potted center is standard mounting method.  Prices include mounting hardware, either a steel washer and two rubber pads or as shown for larger sizes, an epoxy potted center with one or two drilled mounting holes.

Optional Mounting Hardware

For a nominal cost you can order smaller transformers with epoxy potting, either with drilled hole or threaded inserts. The potting has a recessed top to accommodate screw head. Flat bottom is a standard feature.

The L-Bracket
An L-shaped steel bracket is an economical solution for vertical mounting. A metal washer and two rubber pads are furnished with each L-bracket. Larger transformers will have an epoxy potted center.

Standard Sizes of Steel Washers
Dimensions in Inches
SizeABCTD
12.00.75.188.04.18
22.38.88.188.05.22
32.751.13.25.06.26
43.501.25.25.06.28
54.381.38.31.08.33
65.701.75.31.08.50

 

Reach Us

Contact Us for Information and Sales

6 Waterview Drive, Shelton, CT 06484

(203) 954-0050

(800) 836-5920

Fax: (203) 954-0051

sales@bridgeportmagnetics.com

    Contact