Notice: unserialize(): Error at offset 0 of 1 bytes in /www/wp-content/plugins/ultimate-social-media-plus/libs/sfsi_plus_subscribe_widget.php on line 6

Marine Isolation Transformer

Overview

Marine-Puck mounts on top of or below deck or on a bulkhead, internally or externally. Input and output cables may exit from the rear through the mounting surface or from the side of the Marine-Puck near the lower rim in any orientation.
Input:120V/30A or 240V/15A; Output: 120V/30A or 240V/15A

 Marine-Puck transformers feature a toroidal isolation transformer, which is embedded in solid Epoxy resin and contained in a cup shaped Polycarbonate (LEXAN) enclosure. Shore side and boat side power cords protrude from the epoxy potting material and seal the transformer hermetically from the outside meaning that the transformer can be mounted on board, inside or outside onto a deck or bulkhead wherever convenient. Installing a Marine-Puck lowers leakage current to less than 1 milliampere, far exceeding the protection level of any commercial GFI device.

 

Marine-Puck mounts on top of or below deck or on a bulkhead, internally or externally. Input and output cables may exit from the rear through the mounting surface or from the side of the Marine-Puck near the lower rim in any orientation.
Input:120V/30A or 240V/15A; Output: 120V/30A or 240V/15A

 Marine-Puck transformers feature a toroidal isolation transformer, which is embedded in solid Epoxy resin and contained in a cup shaped Polycarbonate (LEXAN) enclosure. Shore side and boat side power cords protrude from the epoxy potting material and seal the transformer hermetically from the outside meaning that the transformer can be mounted on board, inside or outside onto a deck or bulkhead wherever convenient. Installing a Marine-Puck lowers leakage current to less than 1 milliampere, far exceeding the protection level of any commercial GFI device.

 

Input Voltage AC 120V or 240V
Output Voltage

120V or 240V

Output Curent 50A/120V or 25A/240V
Impedance% 2.8%
kVA Continuous 6kVA
Insulation Class

B130C

Hi-Pot Test Voltage 4000V AC RMS
Ambient Temperature

-20 to +40 degrees C

Dimensions 12.6″ OD x 6.5″ Ht.
Approx. Weight 75 lbs
Main Mount 1/2″ carriage bolt

Reach Us

Contact Us for Information and Sales

6 Waterview Drive, Shelton, CT 06484

(203) 954-0050

(800) 836-5920

Fax: (203) 954-0051

sales@bridgeportmagnetics.com

Notice: unserialize(): Error at offset 0 of 1 bytes in /www/wp-content/plugins/ultimate-social-media-plus/libs/controllers/sfsiocns_OnPosts.php on line 243 Notice: Undefined index: sfsi_plus_show_item_onposts in /www/wp-content/plugins/ultimate-social-media-plus/libs/controllers/sfsiocns_OnPosts.php on line 281 Notice: Undefined index: sfsi_plus_show_item_onposts in /www/wp-content/plugins/ultimate-social-media-plus/libs/controllers/sfsiocns_OnPosts.php on line 281 Notice: unserialize(): Error at offset 0 of 1 bytes in /www/wp-content/plugins/ultimate-social-media-plus/libs/controllers/sfsi_frontpopUp.php on line 16